Range Rover Evoque: Easy entry/exit

When Easy entry/exit is configured, the driver’s seat will automatically lower when the ignition is switched off and the door release lever is used. Upon returning to the vehicle, when the driver’s door is closed and the seat belt is fastened, the seat will return to it’s previously set position.

Note: Some vehicle specifications require the ignition to be turned on.

See 56, VEHICLE INFORMATION AND SETTINGS MENU.

READ NEXT:

 Head restraints

Adjust the head restraint so that the top of the head restraint is above the centre line of the head. An incorrectly adjusted head restraint increases the risk of death or serious injury in the

 Integrated head restraints

Models with ‘sports’ seats have non adjustable and non removable head restraints.

 Rear seat access (coupe models)

The front seats tilt and power slide forwards for entry to and exit from the rear seats. Operation is controlled by a lever and switch. 1. Lift the locking lever and pivot the seatback forwards.

SEE MORE:

 Changing a road wheel

Changing a road wheel 1. Temporary spare wheel locking ring. 2. Temporary spare wheel retaining bolt. 3. Tool kit retaining bolt. 4. Jack. 5. Wheel brace. After use, the tool kit should be returned to the under floor storage area and correctly stowed. The spare wheel is heavy and if h

 Sitting in the correct position

The driver and front seat passenger must not ride with the seat fully reclined. Do not adjust the seat while the vehicle is moving. The seat, head restraint, seat belt and airbags, all contribute to the protection of the user. Correct use of these components will give you greater prote

© 2011-2025 Copyright www.rrevoque.org