Range Rover Evoque: Engine malfunction (amber)
Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Warning lamps / Engine malfunction (amber)
Engine malfunction (amber)
Illuminates briefly when the ignition is switched on. If the lamp flashes or illuminates at any other time, there is a fault with the engine.
Avoid high speeds and seek qualified assistance urgently.
READ NEXT:
General warning/information message (amber)
General warning/information message (amber)
Illuminates when a non-critical
warning message or an
information message is available in
the message centre.
Brake systems (amber)
Brake systems (amber)
Illuminates briefly when the
ignition is switched on. If the lamp
illuminates after starting the
engine or while driving, suspect worn brake
pads or a fault with the Emerg
Dynamic stability control (amber)
Dynamic stability control (amber)
Illuminates briefly when the
ignition is switched on and
extinguishes when the engine is
started. If the lamp flashes while driving, the
DSC system is active.
SEE MORE:
Daytime running lamps
Daytime running lamps are LED lamps.
With the lighting control in the OFF position or
in AUTO position while lighting conditions do
not require headlamps on, then daytime
running lamps will switch on automatically
under the following conditions:
- The engine is running.
- The gear selector is
Control Diagram, System Operation
Control Diagram
NOTE: A = Hardwired; D = High Speed CAN (controller area network) bus; N =
Medium Speed CAN bus; O = LIN
(local interconnect network) bus
DW12C is shown, GTDi is similar
Battery
Blower motor
LH (left-hand) temperature blend stepper motor
Windshield distribution (defrost) stepp
© 2011-2025 Copyright www.rrevoque.org
