Range Rover Evoque: Search area
The navigation map database is divided into countries, or geographically defined areas within countries, called search areas. When setting a route, the destination (or waypoint) entered must be in the currently selected search area.
Before attempting to set a destination or waypoint, set the correct search area as follows: - Select Destination entry from the main navigation menu.
- Select page 2 of Destination entry then select Search area.
- Scroll through the list and select the 3 letter code that corresponds to the desired destination area.
- Select OK. The destination entry menu is shown and the information window shows the currently selected search area.
READ NEXT:
Setting a destination
After touching Agree, the initial map screen is
displayed, now select Nav Menu.
From the Navigation Menu, select Destination
entry.
Select Address from the Destination screen
and input the town n
Start guidance
After touching Destination, the system will
calculate the route.
There is now a choice to select 3 Routes,
Change route or to Start navigation guidance.
Touch 3 Routes to display a choice of three
Easy route
In Route options, Easy route can be turned On
or Off.
When On is selected, Easy route changes the
calculation parameters of Route 3 in order to
reduce:
- Junctions.
- Turns.
- Turns that cross
SEE MORE:
Component Description
Parking Aid Module
The parking aid module is located on the LH side of the luggage compartment,
behind the 'C' pillar trim panel.
The parking aid module has three connectors which provide for power, ground and
CAN bus connections, front parking aid
sensors and rear parking aid sensors.
The high
Selecting valet mode
Valet mode allows the vehicle to be driven, e.g.,
by a parking attendant, but leaves the tailgate
locked and restricts use of the touch screen.
This prevents access to telephone numbers,
navigation addresses and audio system
settings.
From the Home menu, select Valet:
Enter a four digit Perso
© 2011-2025 Copyright www.rrevoque.org
