Range Rover Evoque: Telephone system controls
Telephone system controls
1. Change phone. Touch to search new or change to another paired phone.
2. Last 10. Select to access the last 10 dialled, received and missed calls.
3. Phonebook. Select to access the downloaded phonebook.
4. Digit Dial. Select to access Digit Dial mode.
5. Touch and hold soft key 1 to retrieve your Voice mail.
6. Status display. Displays the name and/or number dialled and call duration.
7. Call Connect/Disconnect icons. Touch to send/accept or end/reject a call.
8. Settings. Select to access; Voice mail, Answer options and Phone options.
9. Mute microphone. Select to initiate Privacy mode. While selected, the caller will not hear you talking.
10. Touch to activate/deactivate Auto reject.
When active, any incoming calls will be rejected or diverted to voice mail (depending on mobile phone settings).
11. Use handset. Select to switch the call to your mobile phone.
12. Delete. Touch and release to delete the last entered digit. Touch and hold to delete the whole entered number.
READ NEXT:
Pairing and connecting from your mobile phone
Note: The process of pairing and connecting
your phone with the vehicle using the mobile
phone, will vary depending on the type of
mobile phone used.
1. Switch the ignition on and ensure that the
Pairing and connecting from the touch screen
1. Switch on your mobile phone’s Bluetooth®
connection. Make sure that your mobile
phone is in Bluetooth® discoverable mode,
sometimes referred to as find me mode
(see your phone’s operating
Changing the connected phone
Up to 10 mobile phones can be paired with the
vehicle in the same way. However, only one can
be connected and ready for use as a phone at
any one time.
To connect a different paired phone, follow
SEE MORE:
Stalled adjustment
If seat
movement stops unexpectedly
during adjustment check for any
obstructions and remove.
Once any obstructions have been removed the
seat adjustment mechanism can be reset as
follows.
Operate the button again to continue the stalled
adjustment. When seat movement resumes
hold the butt
Climate Control Assembly
Removal
NOTE: Removal steps in this procedure may contain installation details.
All vehicles
1. CAUTION: LH illustration shown, RH is similar.
NOTE: The procedure must be carried out on both
sides.
Torque: 1.9 Nm
Vehicles with manual transmission
2. Refer to: Gearshift Lever Knob (308-06 Manual
T
