Range Rover Evoque: Overhead Console

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. CAUTION: Take extra care not to damage the edges of the component.

Range Rover Evoque. Instrument Panel and Console

2.

Range Rover Evoque. Instrument Panel and Console

3. NOTE: Do not disassemble further if the component is removed for access only.

Range Rover Evoque. Instrument Panel and Console

4. CAUTION: Take extra care not to damage the wiring harnesses.

Take precautions to avoid any electrostatic charging, which could damage this comopnent.

Range Rover Evoque. Instrument Panel and Console

5.

Range Rover Evoque. Instrument Panel and Console

6. CAUTION: Take extra care not to damage the wiring harnesses.

Range Rover Evoque. Instrument Panel and Console

7.

Range Rover Evoque. Instrument Panel and Console

8.

Range Rover Evoque. Instrument Panel and Console

Installation

1. CAUTION: Take extra care not to damage the wiring harnesses.

NOTE: If installing a new overhead console, make sure the original blanking plugs are installed to the new component.

To install, reverse the removal procedure.

Range Rover Evoque. Instrument Panel and Console

Glove Compartment

Removal

NOTE: Removal steps in this procedure may contain installation details.

1.

Range Rover Evoque. Instrument Panel and Console

2.

Range Rover Evoque. Instrument Panel and Console

3.

Range Rover Evoque. Instrument Panel and Console

4. NOTES:

Left-hand shown, right-hand similar.

The step must be carried out on both sides.

Range Rover Evoque. Instrument Panel and Console

5.

Range Rover Evoque. Instrument Panel and Console

6. Torque: 4 Nm

Range Rover Evoque. Instrument Panel and Console

7.

Range Rover Evoque. Instrument Panel and Console

8.

Range Rover Evoque. Instrument Panel and Console

9. NOTE: Glove compartment shown removed for clarity.

Range Rover Evoque. Instrument Panel and Console

10. Torque: 6 Nm

Range Rover Evoque. Instrument Panel and Console

Installation

1. To install, reverse the removal procedure.

READ NEXT:

 Floor Console Upper Section

Removal NOTE: Removal steps in this procedure may contain installation details. All vehicles 1. CAUTION: The procedure must be carried out on both sides. NOTE: LH illustration shown, RH is similar. T

 Handles, Locks, Latches and Entry Systems

 Locks, Latches and Entry Systems

Principle of Operation For a detailed description of the locks, latches and entry systems and operation, refer to the relevant Description and Operation section of the workshop manual REFER to: Handl

SEE MORE:

 Seat belt (red)

Seat belt (red) Illuminates when the ignition is on and an occupied front seat belt is unbuckled. The lamp will extinguish after sixty seconds or when the relevant seat belt(s) is buckled. In some markets a warning chime will sound while the lamp is illuminated. Note: In some markets, the

 Rear Seat Backrest Cover 3-Door

Removal NOTES: This procedure covers the removal and installation of both rear seat backrests and the LH rear seat backrest cover. The RH rear seat backrest cover is similar. All notes and cautions must be followed strictly to avoid any chance of NVH or failure of the rear seat backrests. 5-door

© 2011-2025 Copyright www.rrevoque.org