Range Rover Evoque: Loadspace Trim Panel
CAUTION: LH illustration shown, RH is similar.
NOTE: Removal steps in this procedure may contain installation details.
All vehicles
1.

2.

3.

4. Torque: 1.4 Nm

5. Torque: 20 Nm

6. NOTE: LH side only.

7.

5-door
8.

9. CAUTION: Take extra care not to damage the
clips.
Release the lower retaining clips first and then the
upper retaining clips. Slide the trim panel forwards to
detach the trim panel.

3-door
10. CAUTION: Take extra care not to damage the
clips.

All vehicles
11. NOTE: If equipped.

12. NOTE: Do not disassemble further if the
component is removed for access only.

13. NOTE: LH side only.

14. NOTE: RH side only.

Installation
1. CAUTION: Take extra care not to damage the clips.
To install, reverse the removal procedure.
READ NEXT:
Removal
NOTE: Removal steps in this procedure may contain installation details.
1.
2.
3.
4.
5. Torque: 6 Nm
6.
Installation
1. To install, reverse the removal procedure.
C-Pillar Lower Trim Pane
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. Refer to: Rear Seat Cushion (501-10 Seating, Removal and
Installation).
2. Refer to: Loadspace Trim Panel (501-05 Int
Torque Specifications
Rear Quarter Panel Moulding
Removal
NOTE: Removal steps in this procedure may contain installation details.
1.
2. NOTE: Discard the retaining clips.
Make sure that the centre
SEE MORE:
The 3.5mm AUX socket allows additional
equipment (e.g. personal stereos MP3 player,
hand-held navigation unit, etc.) to be
connected to the audio system.
The auxiliary power socket, situated next to the
auxiliary jack, can be used to power or charge
any suitable device.
Note: iPod shuffle may
Control Diagram
NOTE: A = Hardwired; D = High Speed Controller Area Network (CAN) bus; O =
Local Interconnect Network ( LIN)
Battery
Battery Junction Box (BJB)
Engine Control Module (ECM)
Central Junction Box (CJB)
Transmission paddle switches
Clockspring
Auxiliary battery module
Transmis
© 2011-2025 Copyright www.rrevoque.org
