Range Rover Evoque: Airbag module covers

cleaned Airbag covers should only be cleaned using a slightly dampened cloth, and a small amount of upholstery cleaner.
Any substance which enters the mechanism can prevent correct deployment of an airbag during an impact.

READ NEXT:

 Carpet and mats

Marks or stains can be removed by gentle scrubbing with a weak solution of soap and warm water. For more stubborn stains a commercially available carpet cleaner should be used.

 Instrument panel,touch screen and audio system

Do not use upholstery cleaner on electrical equipment such as fascia switches. When cleaning around electrical equipment such as switches, ensure that fluids do not leak into any gaps around

 Wiper blade replacement

Fit only replacement wiper blades that are identical to the original specification. Before changing a wiper blade, the wiper arms must be set in the ‘service’ position as follows; Note: The Sm

SEE MORE:

 Overhead Console

Removal NOTE: Removal steps in this procedure may contain installation details. 1. CAUTION: Take extra care not to damage the edges of the component. 2. 3. NOTE: Do not disassemble further if the component is removed for access only. 4. CAUTION: Take extra care not to damage the wiring harnesses.

 Front Suspension - Component Location, System Operation and Component Description

Component Location RH (right-hand) spring and damper assembly Stabilizer bar link Stabilizer bar LH (left-hand) spring and damper assembly Wheel knuckle Hub and bearing assembly Lower control arm Subframe Overview The front suspension features long travel McPherson struts to optimize on a

© 2011-2025 Copyright www.rrevoque.org