Range Rover Evoque: Booster cushions

In a situation where a child is too large to fit into a child safety seat but is still too small to safely use just the three point belt, a booster seat is recommended for maximum safety.

Follow the manufacturer's instructions for fitting and use, then adjust the seat belt to suit.

READ NEXT:

 Installing an isofix child seat

Installing an isofix child seat To install an ISOFIX child seat: 1. Locate the ISOFIX locking mechanism. 2. Slide the child seat into the locking mechanism. 3. If an upper tether is fitted to t

 Tether anchorage points (Australia only)

WARNING: Child restraint anchorages are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances are they to be used for adult seat belts, ha

 Attaching tether straps

1. Install the child restraint securely in one of the rear seating positions. 2. Pass the tether strap over the seat back and beneath the head restraint. 3. Attach the tether strap hook to the tet

SEE MORE:

 Electric seats

Electric seats 1. Lumbar support adjustment. 2. Backrest adjustment. 3. Head restraint adjustment. 4. Height adjustment. 5. Forward and back adjustment. 6. Cushion angle adjustment. To adjust the seats, the Smart Key must be inside the vehicle. Do not adjust the seat while the vehicle

 Control Diagram, System Operation

Control Diagram NOTE: A = Hardwired; D = High Speed CAN (controller area network) bus; N = Medium Speed CAN bus; O = LIN (local interconnect network) bus DW12C is shown, GTDi is similar Battery Blower motor LH (left-hand) temperature blend stepper motor Windshield distribution (defrost) stepp

© 2011-2025 Copyright www.rrevoque.org