Range Rover Evoque: Rear fog lamp

requires Access to the rear fog lamp requires special tools and should be undertaken only by a qualified technician. If in doubt, consult your Land Rover Dealer/Authorised Repairer.

READ NEXT:

 Cleaning the exterior

Remove any heavy deposits of mud and dirt with a hose before washing the vehicle. Never aim a hose water jet directly at the engine air intake, heater air intakes, body seals or at any compone

 Using white spirit

Stubborn stains such as tar spots and grease may require the use of white spirt. After use, ensure the area is washed immediately with warm soapy water to remove all traces of the spirit.

 Underbody maintenance

Regularly flush the underbody with plain water, and pay particular attention to areas where mud and debris collect. If damage or corrosion are detected, have the vehicle checked by your Dealer/Aut

SEE MORE:

 Oil Pan

Removal NOTES: Some illustrations may show the engine removed for clarity. Some variation in the illustrations may occur, but the essential information is always correct. Removal steps in this procedure may contain installation details. Some illustrations may show the engine removed for clarity.

 Catalyst Monitor Sensor

Special Tool(s) 310-121 Wrench, H02S Removal WARNING: Observe due care when working near a hot exhaust system. NOTE: Removal steps in this procedure may contain installation details. 1. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle. 2. Disconnect the batt

© 2011-2025 Copyright www.rrevoque.org