Range Rover Evoque: Vehicle position error

Under certain conditions it is possible for the vehicle position shown on screen to be incorrect. This may happen when: - Driving on a spiral ramp in a building.

- Driving on or beneath elevated roads.

- Two roads are close and parallel.

- The vehicle is transported to another destination.

- After the vehicle is rotated on a turntable.

- After vehicle battery disconnection.

READ NEXT:

 Navigation controls

Consists of two menu screens. Icons for the second menu are shown individually. Navigation controls See 104, TOUCH SCREEN OVERVIEW. 1. Move to other Navigation menu. 2. Cancels current route g

 Map split screen

Map split screen 1. TMC (Traffic Message Channel) information. 2. North is up. 3. Small compass display which always indicates North. 4. Next direction display. 5. Current vehicle position.

 Screen modes

Touch the screen mode selection button (12) to view a series of icons, each depicting a different screen mode (as detailed below). Touch the relevant icon to select the desired screen mode. Ful

SEE MORE:

 After towing on four wheels

1. Apply the parking brake. For vehicles with an automatic gearbox, apply the footbrake and then select Park position. 2. Switch off the ignition and remove the Smart Key from the vehicle. 3. Remove the towing attachment and refit the cover panel to the front bumper. Use extreme caution when

 Unlocking the vehicle

To prevent accidental operation, never leave the Smart Key in the vehicle if children or animals are also left in the vehicle. Note: The operational range of the Smart Key will vary considerably depending on atmospheric conditions and interference from other transmitting devices. Note:

© 2011-2025 Copyright www.rrevoque.org