Range Rover Evoque: Pairing and connecting a bluetooth® media device

For further information on Bluetooth® and device compatibility, see 141, BLUETOOTH® INFORMATION.

Using your media device

Note: The process of pairing and connecting your media device with the vehicle using the media device, will vary depending on the type of media device.

1. Switch the ignition on and ensure that the touch screen is active.

2. From the home menu, select Audio/Video, then My Music.

3. A menu will appear. Select Search new.

4. Select Device to vehicle option.

Note: The vehicle’s Bluetooth® system is discoverable for only 3 minutes.

5. Using the media device, search for Bluetooth® devices.

On some devices, this is referred to as new paired device. See your operating instructions for further information.

6. When the vehicle’s Bluetooth® system is discovered, follow the on-screen instructions. Select Yes when prompted, to confirm the pairing.

Either your device or the vehicle system will ask for a PIN (Personal Identification Number). When prompted, enter a PIN of your choice and select OK to confirm.

7. Enter the same PIN into the other device.

8. Once your device is paired and connected to the system, a confirmation message will be displayed, before switching to the My music, Bluetooth® view.

Note: Some media players do not automatically connect and need to be manually connected, via the device or by using the Change device option.

Using the touch screen

1. Switch on your device’s Bluetooth® connection. Make sure that it is in Bluetooth® discoverable mode, sometimes referred to as find me mode (see your device’s operating instructions for more information).

2. Switch the ignition on and ensure that the touch screen is active.

3. From the home menu, select Audio/Video, then My Music.

4. A menu will appear. Select Search new.

5. Select Vehicle to device option.

6. Identify your device from the displayed list and select the corresponding Pair and connect option.

Note: If more than 5 devices are detected, it may be necessary to use the scroll bar to see the entire list.

7. When prompted, enter the PIN code into your device. See your device operating instructions for further information.

8. Once your device is paired and connected to the system, a confirmation message will be displayed before switching to the My music, Bluetooth® view.

Note: Due to the duration of a Bluetooth® search, it is advised that the time-out to home screen feature is switched off before attempting to search for Bluetooth® devices.
This setting can be changed within Vehicle, Syst settings, Display set, Timeout to home screen.

READ NEXT: