Range Rover Evoque: Rear lamp bulbs

1. Remove the two fixings.

1. Remove the two fixings.

2. Direction indicator.

3. Reversing lamp

Turn the relevant bulb holder counter clockwise and pull to remove from the lamp unit. Grip the holder then press the bulb into the holder and turn counter clockwise to release the bulb. Pull the bulb up to remove.

READ NEXT:

 Rear fog lamp

Access to the rear fog lamp requires special tools and should be undertaken only by a qualified technician. If in doubt, consult your Land Rover Dealer/Authorised Repairer.

 Cleaning the exterior

Remove any heavy deposits of mud and dirt with a hose before washing the vehicle. Never aim a hose water jet directly at the engine air intake, heater air intakes, body seals or at any compone

 Using white spirit

Stubborn stains such as tar spots and grease may require the use of white spirt. After use, ensure the area is washed immediately with warm soapy water to remove all traces of the spirit.

SEE MORE:

 Control Components - Component Location

Component Location COMPONENT LOCATION (GTDI) Refrigerant pressure sensor Cabin humidity sensor (if fitted) A/C (air conditioning) compressor ECT (engine coolant temperature) sensor Ambient air temperature sensor Air intake stepper motor Pollution sensor Windshield distribution (defrost) st

 Wipers and Washers - Component Location, System Operation and Component Description

Component Location COMPONENT LOCATION - SHEET 1 OF 2 Central Junction Box (CJB) Integrated Control Panel (ICP) Rain/Light sensor (if fitted) Right tailgate actuator (upper) Rear wiper motor Left tailgate actuator (upper) Rear Junction Box (RJB) Wiper control switch Instrument Cluster (IC)

© 2011-2025 Copyright www.rrevoque.org