Range Rover Evoque: Reverse gear

the Never select Reverse (R) when the vehicle is in forward motion.

Before selecting reverse gear, ensure the vehicle is stationary and the brakes are applied.

Rotate to R.

READ NEXT:

 Neutral

Disconnects drive to the wheels. Use the parking brake while N is selected. Do not use for vehicle recovery purposes.

 Drive

Never select a forward gear when the vehicle is in rearward motion. Gear changing is fully automatic. Shift points are determined by accelerator pedal position and current road speed.

 Sport mode

The transmission will stay in the lower gears for longer, improving mid-range performance. To deselect Sport mode, move the selector back to D.

SEE MORE:

 Exterior Lighting - Component Location

COMPONENT LOCATION Instrument cluster Hazard flasher switch Rain/Light sensor Rear height sensor (Xenon headlamps only) Side turn signal indicator lamp Headlamp leveling control module CJB (central junction box) Reverse lamp switch Front height sensor (Xenon headlamps only) Stop lamp swi

 Instrument Panel TD4 2.2L Diesel

Removal NOTE: Removal steps in this procedure may contain installation details. All vehicles 1. Make the SRS system safe. Refer to: Standard Workshop Practices (100-00 General Information, Description and Operation). 2. Disconnect the battery ground cable. Refer to: Specifications (414-01 Battery,

© 2011-2025 Copyright www.rrevoque.org