Range Rover Evoque: Search area
The navigation map database is divided into countries, or geographically defined areas within countries, called search areas. When setting a route, the destination (or waypoint) entered must be in the currently selected search area.
Before attempting to set a destination or waypoint, set the correct search area as follows: - Select Destination entry from the main navigation menu.
- Select page 2 of Destination entry then select Search area.
- Scroll through the list and select the 3 letter code that corresponds to the desired destination area.
- Select OK. The destination entry menu is shown and the information window shows the currently selected search area.
READ NEXT:
Setting a destination
After touching Agree, the initial map screen is
displayed, now select Nav Menu.
From the Navigation Menu, select Destination
entry.
Select Address from the Destination screen
and input the town n
Start guidance
After touching Destination, the system will
calculate the route.
There is now a choice to select 3 Routes,
Change route or to Start navigation guidance.
Touch 3 Routes to display a choice of three
Easy route
In Route options, Easy route can be turned On
or Off.
When On is selected, Easy route changes the
calculation parameters of Route 3 in order to
reduce:
- Junctions.
- Turns.
- Turns that cross
SEE MORE:
System Operation
PRINCIPLES OF OPERATION - PARKING AID
Vehicles Fitted With Automatic Transmission
If reverse ) is the first gear selected after the ignition is switched on,
both the front (if fitted) and rear parking aid
sensors will become operational. If a forward drive gear is subsequently
selected, the front
Hdc operation
With HDC engaged, standard descent speed
will not exceed 20km/h (12.4mph).
While the green warning lamp is continuously
illuminated, HDC target speed can be modified
using the cruise control steering wheel
switches, as follows:
- To increase speed, press and hold switch
(2) until the green po
© 2011-2025 Copyright www.rrevoque.org
