Range Rover Evoque: Touch screen remote control

Touch screen remote control
Touch screen remote control

1. Press here to undock remote control.

screen to Do not press the touch screen to undock the remote control.

2. Touch screen.

3. Home screen.

4. Video source select.

5. Audio source select.

6. Right screen select.

7. Right screen tell-tale. (illuminates when right screen has been selected).

8. Cursor movement and option select buttons.

9. Left screen tell-tale. (illuminates when left screen has been selected).

10. Left screen select.

11. Screen brightness - decrease.

12. Screen brightness - increase.

13. RSE settings.

READ NEXT:

 Using the system

The system is operated using the remote control. To release the remote from the docked position, press at the top of the remote (1) to unlatch it. Do not attempt to pull the remote control ou

 Headphones

The volume control for each set of headphones is adjusted on the headphones. Press the channel selector button to cycle through available channels. Select the channel appropriate for the required

 Remote control battery

The remote control battery is automatically recharged while the remote is docked. The battery is not serviceable and should not be changed or removed by the user.

SEE MORE:

 Front Stabilizer Bar Bushing

Removal NOTES: Some variation in the illustrations may occur, but the essential information is always correct. Removal steps in this procedure may contain installation details. 1. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle. 2. Remove the front wheels

 Engine Cooling - Diagnosis and Testing

Principles of Operation For a detailed description of the cooling system, refer to the relevant Description and Operation section in the workshop manual. REFER to: (303-03B Engine Cooling - GTDi 2.0L Petrol) Inspection and Verification CAUTION: Diagnosis by substitution from a donor vehicle is NOT

© 2011-2025 Copyright www.rrevoque.org