Range Rover Evoque: Vehicle position error

Under certain conditions it is possible for the vehicle position shown on screen to be incorrect. This may happen when: - Driving on a spiral ramp in a building.

- Driving on or beneath elevated roads.

- Two roads are close and parallel.

- The vehicle is transported to another destination.

- After the vehicle is rotated on a turntable.

- After vehicle battery disconnection.

READ NEXT:

 Navigation controls

Consists of two menu screens. Icons for the second menu are shown individually. Navigation controls See 104, TOUCH SCREEN OVERVIEW. 1. Move to other Navigation menu. 2. Cancels current route g

 Map split screen

Map split screen 1. TMC (Traffic Message Channel) information. 2. North is up. 3. Small compass display which always indicates North. 4. Next direction display. 5. Current vehicle position.

 Screen modes

Touch the screen mode selection button (12) to view a series of icons, each depicting a different screen mode (as detailed below). Touch the relevant icon to select the desired screen mode. Ful

SEE MORE:

 Lumbar Assembly Vehicles With: Sports Seats

Removal NOTE: Removal steps in this procedure may contain installation details. 1. Make the SRS system safe. Refer to: Standard Workshop Practices (100-00 General Information, Description and Operation). 2. Disconnect the battery ground cable. Refer to: Specifications (414-01 Battery, Mounting and

 Front Airbag Deployment - Driver and Passenger

CAUTION: If the front airbags are deployed, the following components must be replaced: Driver airbag module Steering wheel Passenger airbag module Instrument panel Fly leads (where applicable) connecting front airbag modules to SRS harness All seat belt buckle pre-tensioner All occupied

© 2011-2025 Copyright www.rrevoque.org