Range Rover Evoque: Diesel glow plug (amber)

Diesel glow plug (amber)
Diesel glow plug (amber)

Illuminates when the ignition is switched on to indicate that the glow plugs are active. Wait until the lamp extinguishes before starting the engine.

READ NEXT:

 External temperature (amber)

External temperature (amber) Illuminates when the external temperature is low enough that ice may be present on the road.

 Tyre pressure monitoring (yellow)

Tyre pressure monitoring (yellow) Illuminates briefly when the ignition is switched on. If the lamp remains on or illuminates while driving, one or more tyres are significantly under-inflated.

 Hill descent control (green)

Hill descent control (green) Illuminates when HDC is selected and HDC operating conditions are met. If the lamp flashes, HDC has been selected, but the operating conditions are not being met (e

SEE MORE:

  Front Side Member Closing Panel

Removal NOTES: The front side member closing panel is manufactured from RP260. The front side member closing panel is serviced as part of the front side member and suspension top mount assembly. This method describes the LH front side member closing panel, the RH side is similar. The panel is s

  Fender Apron Panel Front Reinforcement

Removal NOTES: The fender apron panel front reinforcement is manufactured from RP220 and mild steel. The panel is serviced less its weld studs 1. In this procedure, to make sure the vehicle is correctly aligned, it must be placed on an approved alignment jig. 2. The front side member and fender a

© 2011-2026 Copyright www.rrevoque.org - 0.0034