Range Rover Evoque: Blower Motor LHD AWD/LHD FWD

Special Tool(s)

412-140
Remover/Installer, Blower Motor

Removal

NOTES: Removal steps in this procedure may contain installation details.

Some variation in the illustrations may occur, but the essential information is always correct.

1. NOTE: The recirculation blend door must be closed in order for the removal of the recirculation blend door housing. Activate recirculation.

2. Disconnect the battery ground cable.

Refer to: Specifications (414-01 Battery, Mounting and Cables, Specifications).

3. Refer to: Accelerator Pedal (310-02 Acceleration Control, Removal and Installation).

4. Refer to: Central Junction Box (CJB) (418-00 Module Communications Network, Removal and Installation).

5.

6.

7.

8. Torque: 10 Nm

9.

10.

11.

12.

13. Special Tool(s): 412-140

14.

15. CAUTION: Make sure that the special tool is correctly located.

NOTE: With assistance remove the component.

Installation

1.

2.

3. To install, reverse the removal procedure.

READ NEXT: