Range Rover Evoque manuals

Range Rover Evoque: Lower Arm

Land Rover Range Rover Evoque L538 (2011–2018) Service Manual / Suspension / Front Suspension / Lower Arm

Removal

CAUTION: Nuts and bolts must be tightened with the weight of the vehicle on the suspension.

NOTES:

RH illustration shown, LH is similar.

Removal steps in this procedure may contain installation details.

1. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle.

2. Refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation).

3. WARNING: Make sure that a new nut is installed. Torque: 60 Nm

Range Rover Evoque. Front Suspension

4.

Range Rover Evoque. Front Suspension

5. WARNING: Make sure that a new bolt is installed. Torque: 200 Nm

Range Rover Evoque. Front Suspension

6. WARNING: Make sure that a new bolt is installed.

Torque:

Stage 1: 48 Nm
Stage 2: 180

READ NEXT:

 Front Stabilizer Bar AWD

Removal CAUTION: Nuts and bolts must be tightened with the weight of the vehicle on the suspension. NOTES: Only use clean water as a lubricant for the bushing, if required. Removal steps in this pro

 Front Stabilizer Bar Bushing

Removal NOTES: Some variation in the illustrations may occur, but the essential information is always correct. Removal steps in this procedure may contain installation details. 1. WARNING: Make sure

 Wheel Knuckle

Special Tool(s) 205-754A Splitter, Ball Joints 205-857 Remover, Halfshaft JLR-204-804 Lever, Wheel Knuckle Removal CAUTIONS: Nuts and bolts must be tightened with the weight of the vehicle on the sus

SEE MORE:

  Engine System - General Information

Cylinder Head Gasket Selection TD4 2.2L Diesel Special Tool(s) 303-979 Measuring Bridge, Piston Protusion 1. CAUTION: Make sure that the surface is clean and free of foreign material. Zero the gauge on the cylinder block machined face. Special Tool(s): 303-979 2. CAUTION: Make sure that the surfac

  Engine - Component Location, System Operation and Component Description

Component Location EXTERNAL VIEW Overview OVERVIEW The 2.0L Gasoline Turbocharged Direct Injection (GTDi) engine is an in-line, double overhead camshaft, 4 cylinder engine, which is transverse mounted in the engine compartment. The engine weight is kept to a minimum by using aluminum for the cyli

© 2011-2026 Copyright www.rrevoque.org - 0.0083