Range Rover Evoque manuals

Range Rover Evoque: Body Repairs - Vehicle Specific Information and Tolerance Checks

Land Rover Range Rover Evoque L538 (2011–2018) Service Manual / Body and Paint / Body Repairs - Vehicle Specific Information and Tolerance Checks

Body and Frame

Front End Body Dimensions

NOTES:

All dimensions shown are in millimetres (mm).

Dimensions shown to holes, are always taken from/to the hole centre. They are also always to the body panel surface, not to the top of bolts or components.

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Side Panel Dimensions

3-door version

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

5-door version

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

3-door version

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

5-door version

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Rear End Body Dimensions

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Under Body Dimensions

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Gap and Profile measurements

The following information is to be used as a guide to assist the technician in installing exterior body panels and trim items so as to achieve a correctly aligned and cosmetically acceptable vehicle.

NOTE: All dimensions shown are in millimetres (mm).

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

READ NEXT:

 Front End Sheet Metal Repairs

 Front Bumper Mounting

Removal NOTE: The front bumper mounting is manufactured from HSLA300 and mild steel. 1. In this procedure, to make sure the vehicle is correctly aligned, it must be placed on an approved alignment j

 Front Side Member

Removal NOTES: The front side member is manufactured from RP260 and DP600. The front side member long section is cut from the front side member and is manufactured from RP260. The service panel is

SEE MORE:

  Replacement tyres

Do not fit cross ply tyres. Do not fit tubed tyres. Do not rotate tyres around the vehicle. If the use of tyres not recommended by Land Rover is unavoidable, ensure that you read and fully comply with the tyre manufacturer’s instructions. Ideally, tyres should be replaced in sets of 4. If t

  Tyre pressure compensation for low ambient temperature changes

A colder ambient local temperature will reduce pressure within the tyre. An effect is to decrease sidewall height and to increase tyre shoulder wear with the potential for tyre failure. Vehicle dynamics could also be adversely affected. Tyre pressures can be adjusted to compensate before the

© 2011-2026 Copyright www.rrevoque.org - 0.0034