Range Rover Evoque: Fuel Charging and Controls - Component Location, System Operation and Component Description
Component Location
COMPONENT LOCATION

Overview
OVERVIEW
The 2.0L GTDi engine is equipped with a high-pressure direct injection system
controlled by the ECM (engine control
module). A high-pressure fuel pump delivers a uniform level of pressure to the
shared fuel rail, which serve all 4 fuel
injectors. Pressure is controllable, to the optimum level for smooth operation,
up to 150 bar (2175 lbf/in
READ NEXT:
Removal
NOTES:
Removal steps in this procedure may contain installation details.
Some illustrations may show the engine removed for clarity.
1. WARNING: Make sure to support the vehicle with axle sta
Special Tool(s)
310-198
Installer, Teflon Seal
310-199
Re-shape Tool, Teflon Seal
Removal
CAUTION: Make sure that all openings are sealed. Use new blanking caps.
NOTE: Some variation in the illustrat
Removal
WARNING: This procedure involves fuel handling. Be prepared for fuel
spillage at all times and always observe fuel
handling precautions. Failure to follow these instructions may result in
pe
SEE MORE:
Lubricants, Fluids, Sealers and Adhesives
General Specification
Torque Specifications
* Tighten bolts progressively by diagonal selection.
Clutch Disc and Pressure Plate Vehicles With: M66 6-Speed Manual
Transmission AWD
Special Tool(s)
303-1272
Locking Tool, Flywheel
308-667
Aligner, Clutch
Remo
Torque Specifications
Clutch
Controls - Component Location
COMPONENT LOCATION
Brake/clutch reservoir
Clutch pedal bracket
Clutch master cylinder
High pressure hose
Connector
Clutch slave cylinder and release bearing
Hydraulic adaptor and peak torque limiter
Bleed screw
Clutch pedal
Line
© 2011-2026 Copyright www.rrevoque.org - 0.004
