Range Rover Evoque manuals

Range Rover Evoque: After towing on four wheels

Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Vehicle recovery / After towing on four wheels

1. Apply the parking brake. For vehicles with an automatic gearbox, apply the footbrake and then select Park position.

2. Switch off the ignition and remove the Smart Key from the vehicle.

3. Remove the towing attachment and refit the cover panel to the front bumper.

detaching Use extreme caution when detaching towing equipment. Vehicle movement is possible which can result in serious injury.

READ NEXT:

 After a collision

 Before starting or driving

If the vehicle is involved in a collision it should be checked by a Dealer/ Authorised Repairer, or suitably qualified persons, before starting or driving.

 Event data recording

Event data recorders are capable of collecting and storing short sequences of data during a crash or near-crash event. The recorded information may assist in the investigation of such an event. Th

SEE MORE:

 Epb automatic use

EPB will be applied automatically if the ignition is switched off and the vehicle speed is below 3km/h (2mph). To prevent automatic operation, when the vehicle is stationary, press and hold the EPB switch in the release position. Within 5 seconds, switch off the ignition and continue to hold

 Engine Upper/Lower Support Insulator

Engine Upper Support Insulator Removal NOTES: Removal steps in this procedure may contain installation details. Some variation in the illustrations may occur, but the essential information is always correct. 1. Refer to: Engine Mount RH (303-01B Engine - GTDi 2.0L Petrol, Removal and Installation)

© 2011-2025 Copyright www.rrevoque.org