Range Rover Evoque manuals

Range Rover Evoque: Fuel Fired Booster Heater FWD

Land Rover Range Rover Evoque L538 (2011–2018) Service Manual / Climate Control System / Auxiliary Climate Control / Fuel Fired Booster Heater FWD

Component Location

COMPONENT LOCATION - VEHICLES WITHOUT FFBH REMOTE CONTROL

  1. ATC (automatic temperature control) module
  2. Fuel Fired Booster Heater (FFBH)
  3. Auxiliary coolant pump
  4. Ambient air temperature sensor
  5. Auxiliary fuel pump

COMPONENT LOCATION - VEHICLES WITH FFBH REMOTE CONTROL

  1. ATC module
  2. Fuel Fired Booster Heater (FFBH)
  3. Auxiliary coolant pump
  4. Ambient air temperature sensor
  5. Auxiliary fuel pump
  6. FFBH Receiver
  7. FFBH antenna matching unit

Overview

OVERVIEW

NOTE: There is no auxiliary coolant pump fitted if there is no FFBH fitted (from VIN 631090).

The Fuel Fired Booster Heater (FFBH) is rated at 5 kW and compensates for the relatively low coolant temperatures inherent in the diesel engine. The unit is located behind the RH (right-hand) front fender splash shield and heats engine coolant downstream of the heater core.

Operation of the FFBH is controlled by the ATC (automatic temperature control) module via the medium speed CAN (controller area network) bus. The operation of the FFBH is influenced by:

The FFBH will operate if the ambient air temperature is lower than 5

READ NEXT:

 Instrumentation and Warning Systems

 Instrument Cluster

Instrument Cluster - Component Location COMPONENT LOCATION Instrument Cluster - Overview OVERVIEW The instrument cluster comprises two analogue gages for the speedometer and the tachometer and a 5 i

 Information and Message Center

Information and Message Center - Component Location COMPONENT LOCATION Information and Message Center - Overview OVERVIEW The message center is located in the instrument cluster, in a central positio

SEE MORE:

 Rear Door

Removal NOTES: Removal steps in this procedure may contain installation details. Some variation in the illustrations may occur, but the essential information is always correct. 1. Disconnect the battery ground cable. Refer to: Specifications (414-01 Battery, Mounting and Cables, Specifications).

 Seats - Diagnosis and Testing

Principle of Operation For a detailed description of the seating systems and operation, refer to the relevant Description and Operation section of the workshop manual. REFER to: Seats (501-10 Seating, Description and Operation). Inspection and Verification CAUTION: Diagnosis by substitution from a

© 2011-2025 Copyright www.rrevoque.org