Range Rover Evoque: Setting a destination
After touching Agree, the initial map screen is displayed, now select Nav Menu.
From the Navigation Menu, select Destination entry.
Select Address from the Destination screen and input the town name.
Once sufficient letters have been entered, touch List to display all the possible towns.
If necessary, use the scroll arrows to the left of the list to search up or down. Select the town you require.
Now enter the road name. Once sufficient letters have been entered, touch List to display all the possible roads.
Select the road you require.
Enter the house number of the address (if known) then touch OK to confirm.
If the house number is not known, press OK - the mid-point of the road is then used as the destination.
The map screen showing the route settings and destination details is displayed.
READ NEXT:
Start guidance
After touching Destination, the system will
calculate the route.
There is now a choice to select 3 Routes,
Change route or to Start navigation guidance.
Touch 3 Routes to display a choice of three
Easy route
In Route options, Easy route can be turned On
or Off.
When On is selected, Easy route changes the
calculation parameters of Route 3 in order to
reduce:
- Junctions.
- Turns.
- Turns that cross
Learn route
In Route options, Learn route can be turned
On or Off.
When On is selected, if you make the same
deviation from the proposed route three times,
then the system will memorise the deviation
and off
SEE MORE:
Dealer locations
Details of Land Rover Dealers are held on the
Navigation System hard drive as a points of
interest (POI) category. Certain Dealers may be
located in areas that are not fully mapped on
the hard drive. If a route is set to one of these
Dealers, guidance may only be possible to the
nearest town c
After towing on four wheels
1. Apply the parking brake. For vehicles with
an automatic gearbox, apply the footbrake
and then select Park position.
2. Switch off the ignition and remove the
Smart Key from the vehicle.
3. Remove the towing attachment and refit
the cover panel to the front bumper.
Use extreme caution when
