Range Rover Evoque: Headlamp courtesy delay

This feature operates whenever the lamps master switch is in the AUTO (5) position and the ignition is turned off. The headlamps will remain illuminated for up to 240 seconds.

Note: The time delay may be changed via the Vehicle settings menu. See 56, VEHICLE INFORMATION AND SETTINGS MENU.

Courtesy lamps can be switched off at any time by pressing the headlamps button on the Smart Key.

READ NEXT:

 High beam assist

This feature of the Xenon lighting automatically selects and deselects high beam, under specific conditions of road lighting and in the absence of other vehicle’s lights. The system is only acti

 Auto lamps windscreen wiper detection

If Auto lamps is selected and the windscreen wipers are switched on for 20 seconds or more, the side lamps, tail lamps and headlamps will switch on automatically. When the wipers are switched off,

 Condensation

Misting of lamp lenses can occur under some atmospheric conditions. This will not affect the performance of the lamps and will clear during normal operation.

SEE MORE:

 Active On-Demand Coupling Module

Removal NOTE: If a new Active on-demand coupling module is installed, the throttle valve must also be installed. 1. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle. 2. 3. CAUTIONS: Make sure that the area around the component is clean and free of foreign m

 Crankshaft Position (CKP) Sensor

Special Tool(s) 303-1390A CKP Sensor Alignment Tool JLR-303-1595 Alignment Tool, Crankshaft Damper Removal NOTE: Removal steps in this procedure may contain installation details. 1. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle. 2. Refer to: Wheel and Tire

© 2011-2025 Copyright www.rrevoque.org