Range Rover Evoque: Brake systems (amber)

Brake systems (amber)
Brake systems (amber)

Illuminates briefly when the ignition is switched on. If the lamp illuminates after starting the engine or while driving, suspect worn brake pads or a fault with the Emergency Brake Assist (EBA) system. The vehicle can still be driven with care, but avoid heavy brake application.

Seek qualified assistance urgently.

READ NEXT:

 Dynamic stability control (amber)

Dynamic stability control (amber) Illuminates briefly when the ignition is switched on and extinguishes when the engine is started. If the lamp flashes while driving, the DSC system is active.

 Dynamic stability control off (amber)

Dynamic stability control off (amber) Illuminates when DSC is switched off. Deactivating DSC also reduces the level of Electronic Traction Control intervention and may lead to an increase in wh

 Anti-lock braking system (amber)

Anti-lock braking system (amber) Illuminates briefly when the ignition is switched on. If the lamp remains on or illuminates while driving, there is a fault with the ABS system. Drive with care

SEE MORE:

 Electronic Engine Controls

Principles of Operation For a detailed description of the 2.0L GTDi petrol electronic engine controls, refer to the relevant Description and Operation section in the workshop manual. REFER to: (303-14B Electronic Engine Controls - GTDi 2.0L Petrol) Inspection and Verification CAUTION: Diagnosis by

 After towing on four wheels

1. Apply the parking brake. For vehicles with an automatic gearbox, apply the footbrake and then select Park position. 2. Switch off the ignition and remove the Smart Key from the vehicle. 3. Remove the towing attachment and refit the cover panel to the front bumper. Use extreme caution when

© 2011-2026 Copyright www.rrevoque.org