Range Rover Evoque manuals

Range Rover Evoque: Engine Upper/Lower Support Insulator

Land Rover Range Rover Evoque L538 (2011–2018) Service Manual / Engine / Engine - GTDi 2.0L Petrol / Engine Upper/Lower Support Insulator

Engine Upper Support Insulator

Removal

NOTES:

Removal steps in this procedure may contain installation details.

Some variation in the illustrations may occur, but the essential information is always correct.

1. Refer to: Engine Mount RH (303-01B Engine - GTDi 2.0L Petrol, Removal and Installation).

2. Torque: 10 Nm

Range Rover Evoque. Engine - GTDi 2.0L Petrol

3. Torque: 80 Nm

Range Rover Evoque. Engine - GTDi 2.0L Petrol

Installation

1. To install, reverse the removal procedure.

Engine Lower Support Insulator

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle.

2. Refer to: Engine Undershield (501-02 Front End Body Panels, Removal and Installation).

3. CAUTION: Discard the bolts.

Range Rover Evoque. Engine - GTDi 2.0L Petrol

4. CAUTION: Discard the bolt.

Range Rover Evoque. Engine - GTDi 2.0L Petrol

Installation

1. CAUTIONS:

Make sure that a new bolt is installed.

Only tighten the bolt finger-tight at this stage.

Range Rover Evoque. Engine - GTDi 2.0L Petrol

2. CAUTIONS:

Make sure that new bolts are installed.

Install all the bolts finger tight before final tightening.

Torque:

READ NEXT:

 Oil Filter Housing

Removal NOTES: Some illustrations may show the engine removed for clarity. Some variation in the illustrations may occur, but the essential information is always correct. Removal steps in this proc

 Balance Shaft Assembly

Special Tool(s) JLR-303-1595 Alignment Tool, Crankshaft Damper Removal NOTES: Some illustrations may show the engine removed for clarity. Some variation in the illustrations may occur, but the essent

 Engine - Diagnosis and Testing

Principles of Operation For a detailed description of the engine system, refer to the relevant Description and Operation section in the workshop manual. REFER to: (303-01B Engine - GTDi 2.0L Petrol)

SEE MORE:

 Fuel Tank and Lines - System Operation and Component Description

Control Diagram NOTE: A = Hardwired Battery Battery Junction Box (BJB) Fuel Pump Driver Module (FPDM) Fuel pump delivery module Engine Control Module (ECM) Central Junction Box (CJB) System Operation OPERATION The 2.0L GTDi fuel system uses a returnless fuel system. The fuel pump operation

 Electric Booster Heater - Description and Operation

Component Location COMPONENT LOCATION Heater assembly Electric booster heater Overview OVERVIEW Due to the slower warm up times associated with the diesel engine, an electric booster heater may be fitted to increase heater performance. The electric booster heater does this by heating the air

© 2011-2025 Copyright www.rrevoque.org