Range Rover Evoque: Programmed position loss

The powered tailgate may lose its position memory if there are multiple object detections or if battery voltage is low. Powered operation may be inhibited. To reset the tailgate; 1. Manually close the tailgate.

2. Press a release switch.

3. Allow the tailgate to power fully open or to the previously set position.

4. Press and release the close switch.

5. Allow the tailgate to power close fully.

The tailgate programmed position memory will now be restored.

READ NEXT:

 Changing the smart key batttery

When the battery needs renewing, there will be a significant decrease in the effective range and the message SMART KEY BATTERY LOW will be displayed in the message centre. To renew the battery:

 Exiting the vehicle

 Locking and arming the alarm

CAUTION: No modifications or additions should be made to the anti-theft system. Such changes could cause the system to malfunction. There are two levels of security: - Single locking. With all d

SEE MORE:

 Torque Converter, Valve Block

TORQUE CONVERTER Torque converter housing Lock-up clutch Turbine Impeller Stator Fluid pump Input shaft The torque converter is the coupling element between the engine and the transmission and is located in the transmission housing, on the engine side of the transmission. The driven power

 Front Bumper Mounting

Removal NOTE: The front bumper mounting is manufactured from HSLA300 and mild steel. 1. In this procedure, to make sure the vehicle is correctly aligned, it must be placed on an approved alignment jig. 2. The front bumper mounting is replaced in conjunction with: Front bumper cover Front bumper

© 2011-2025 Copyright www.rrevoque.org