Range Rover Evoque: Rear view camera
It remains the driver's
responsibility
to detect obstacles and estimate the
vehicle's distance from them when
reversing.
When Reverse (R) is selected the camera provides a wide-angle rear view colour image on the touch screen.
The camera display has priority over the parking aid display. To view the parking aid display instead or to cancel camera display at any time, briefly touch the display.
To adjust the camera settings, touch and hold anywhere on the touch screen to access the user options screen.
The display also incorporates graphic overlays, indicating vehicle direction, width and proximity to surrounding objects.
A. Solid line: The projected path based on current steering wheel position.
B. Dotted line: The safe working width of the vehicle (including exterior mirrors).
C. Tailgate access guideline: Do not reverse beyond this point if tailgate access is required.
D. Parking sensor activation: A coloured area appears, to indicate which rear sensor(s) has been activated.
E. User option. Touch to enable/disable A, B & C.
F. User option. Touch to enable/disable D.
G. User option. Touch to enable/disable Hitch Assist guidance lines.
Some overhanging objects or
barriers
which could cause damage to the
vehicle, may not be detected by the
camera.
READ NEXT:
Park assist
Park assist is a driving aid
only. It
remains the driver's responsibility to
drive with due care and attention
during parking manoeuvres.
Park assist may not detect moving
objects such as chil
System fault
If a system fault is detected, a continuous tone
will sound and a message will be displayed in
the message centre. Contact your Dealer/
Authorised Repairer as soon as possible.
SEE MORE:
Headlamp Adjustment
NOTE: The headlamp setting is 1.2 % below horizontal and parallel.
1. Align the headlamp beam setting equipment to one headlamp.
2. Switch the headlamps on and to dipped beam.
3. NOTE: NAS vehicles have vertical adjustment only.
Adjust the headlamps with an Allen Key.
Rotate the adjuster 'A' for
General program (special programs off)
This program is compatible with all
on and off-road conditions. If not
already active, it should be selected
before driving on surfaces which are similar to
a hard road surface. Dry cobbles, tarmac, dry
wooden planks, etc., all fall into this category.
This program should be selected once th
