Range Rover Evoque: Temporary spare wheel

instructions Always adhere to the instructions given on the temporary use spare wheel warning label. Failure to comply can be dangerous.
When a temporary use spare wheel is fitted, drive with caution and replace with the specified wheel and tyre as soon as possible.
Do not fit more than one temporary use spare wheel and tyre assembly at one time.
The temporary use spare wheel must be inflated to 4.2 bar (60 psi, 420 kPa) and cannot be repaired.
Temporary use spare wheel, maximum speed is 80 km/h (50 mph).
DSC must be switched on while the temporary spare wheel is in use.
Traction devices such as snow chains cannot be used with a temporary spare wheel.

READ NEXT:

 Using wheel chocks

Note: Wheel chocks are not supplied as part of the tool kit. Wheel chocks are a useful addition to a vehicle tool kit. Note the following advice when using wheel chocks. Before raising the vehic

 Wheel changing safety

Before raising the vehicle or changing a wheel, ensure that you read and comply with the following warnings. Always find a safe place to stop, off the highway and away from traffic. Ensure tha

 Locking wheel nuts

Locking wheel nuts can be removed only by using the special adapter provided in the tool kit. Note: When the vehicle is first supplied, the adapter may be stored in the glove compartment. It shou

SEE MORE:

 Changing a road wheel

Changing a road wheel 1. Temporary spare wheel locking ring. 2. Temporary spare wheel retaining bolt. 3. Tool kit retaining bolt. 4. Jack. 5. Wheel brace. After use, the tool kit should be returned to the under floor storage area and correctly stowed. The spare wheel is heavy and if h

 Event data recording

Event data recorders are capable of collecting and storing short sequences of data during a crash or near-crash event. The recorded information may assist in the investigation of such an event. The EDR may record information about vehicle dynamics and safety systems, potentially including such

© 2011-2025 Copyright www.rrevoque.org