Range Rover Evoque: Trailer levelling

To maintain vehicle stability, it is essential that the trailer is loaded so that it remains parallel to the ground. This is particularly important when towing twin axled trailers.

Vssential towing checks

READ NEXT:

 Trailer electrical connection

Connect only approved electrical circuits, which are in good condition, to the trailer socket. The vehicle connector provides a 5 amp output which must not be exceeded. An accessory harness ki

 Powered tailgate

When towing, ensure there is sufficient clearance before opening or closing the tailgate.

 Parking aids

The rear parking aids sensors are automatically disabled when a trailer with an approved electrical connector is connected. Note: Trailers fitted with LED lights will not disable the rear parking

SEE MORE:

 Passenger Seat Cushion Vehicles With: Sports Seats

Removal NOTE: Removal steps in this procedure may contain installation details. All vehicles 1. Disconnect the battery ground cable. Refer to: Specifications (414-01 Battery, Mounting and Cables, Specifications). 2. Make the SRS system safe. Refer to: Standard Workshop Practices (100-00 General In

 Touch screen overview

Note: Physical controls are referred to as hard keys. Virtual buttons on the touch screen are referred to as soft keys. Screen options will vary depending on vehicle specification and set-up. Touch screen overview 1. Screen on/off. The first use after switching the ignition on will display

© 2011-2025 Copyright www.rrevoque.org