Range Rover Evoque: Touch screen remote control

Touch screen remote control
Touch screen remote control

1. Press here to undock remote control.

screen to Do not press the touch screen to undock the remote control.

2. Touch screen.

3. Home screen.

4. Video source select.

5. Audio source select.

6. Right screen select.

7. Right screen tell-tale. (illuminates when right screen has been selected).

8. Cursor movement and option select buttons.

9. Left screen tell-tale. (illuminates when left screen has been selected).

10. Left screen select.

11. Screen brightness - decrease.

12. Screen brightness - increase.

13. RSE settings.

READ NEXT:

 Using the system

The system is operated using the remote control. To release the remote from the docked position, press at the top of the remote (1) to unlatch it. Do not attempt to pull the remote control ou

 Headphones

The volume control for each set of headphones is adjusted on the headphones. Press the channel selector button to cycle through available channels. Select the channel appropriate for the required

 Remote control battery

The remote control battery is automatically recharged while the remote is docked. The battery is not serviceable and should not be changed or removed by the user.

SEE MORE:

 Floor Console Upper Section

Removal NOTE: Removal steps in this procedure may contain installation details. All vehicles 1. CAUTION: The procedure must be carried out on both sides. NOTE: LH illustration shown, RH is similar. Torque: 1.9 Nm Vehicles with manual transmission 2. Refer to: Gearshift Lever Knob (308-06 Manual Tr

 Fender Apron Lower Panel

Removal NOTES: The fender apron lower panel is manufactured from mild steel. The panel is serviced less its weld studs This method describes the LH fender apron lower panel, the RH side is similar. 1. The fender apron lower panel is replaced in conjunction with: Front bumper cover Front bumper

© 2011-2025 Copyright www.rrevoque.org