Range Rover Evoque: Disability modifications

Occupants with disabilities which may require modification of the vehicle, must contact a Dealer/Authorised Repairer before any modifications are made.

READ NEXT:

 Parts and accessories

The fitting of non-approved parts and accessories, or the carrying out of non-approved alterations or conversions, may be dangerous and could affect the safety of the vehicle and occupants and

 Road testing dynamometers (rolling roads)

It is essential that any dynamometer testing is carried out only by a qualified person, familiar with the dynamometer testing and safety procedures practised by Dealers/ Authorised Repairers.

 Safety in the garage

If the vehicle has been driven recently, do not touch exhaust and cooling system components until the engine has cooled. Never leave the engine running in an unventilated area - exhaust gases

SEE MORE:

 After towing on four wheels

1. Apply the parking brake. For vehicles with an automatic gearbox, apply the footbrake and then select Park position. 2. Switch off the ignition and remove the Smart Key from the vehicle. 3. Remove the towing attachment and refit the cover panel to the front bumper. Use extreme caution when

 Occupant safety using seat belts

Occupant safety using seat belts 1. Putting on a seat belt: Draw the belt out smoothly, ensure that the belt height, the seat and your position on the seat, are correct. WARNING: Seatbelts are designed to bear upon the bony structure of the body, and should be worn low across the front

© 2011-2025 Copyright www.rrevoque.org