Range Rover Evoque: Driver override options

Although Dynamic Stability Control is automatically engaged when a special program is selected, it can be turned off if required. See 91, DISABLING DSC.

Hill Descent Control (HDC) will be automatically engaged for some terrain response programs. If required it can be deselected or engaged independently of Terrain response. See 96, HILL DESCENT CONTROL (HDC) CONTROLS.

The HDC status will be displayed on the message centre whether it is engaged, or disengaged, by the system or by the driver.

READ NEXT:

 System difficulties

Use of an incorrect program will impair the vehicle's response to the terrain and can reduce the life of the suspension and drive systems. If the system becomes partially inoperable for any re

 Terrain response messages

Messages relating to the Terrain response system are displayed in the message centre. See 56, INSTRUMENT PANEL. Most of the messages that appear will be for information only and require no driver

 Hill descent control

SEE MORE:

 Differential Case Vehicles With: AWF21 6-Speed Automatic Transmission

Removal NOTE: Removal steps in this procedure may contain installation details. All vehicles 1. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle. 2. Remove the LH rear wheel and tire. Refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installati

 Parking Aid Module (PAM)

 CAUTIONS: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault, and may also cause additional faults in the vehicle being tested and/or the donor vehicle When probing connectors to take measurements in th

© 2011-2026 Copyright www.rrevoque.org