Range Rover Evoque: Electric seats

Electric seats
Electric seats

1. Lumbar support adjustment.

2. Backrest adjustment.

3. Head restraint adjustment.

4. Height adjustment.

5. Forward and back adjustment.

6. Cushion angle adjustment.

To adjust the seats, the Smart Key must be inside the vehicle.

the seat while the Do not adjust the seat while the vehicle is moving. Doing so could cause loss of vehicle control and personal injury.

READ NEXT:

 Stalled adjustment

If seat movement stops unexpectedly during adjustment check for any obstructions and remove. Once any obstructions have been removed the seat adjustment mechanism can be reset as follows. Ope

 Sitting in the correct position

The driver and front seat passenger must not ride with the seat fully reclined. Do not adjust the seat while the vehicle is moving. The seat, head restraint, seat belt and airbags, all con

 Memory seats

Front seat positions can be saved to vehicle memory. Once you have adjusted the power operated driver’s seat and the exterior mirrors, the vehicle can memorise the settings for future use. See

SEE MORE:

 Transmission Control Module (TCM), Gear Shift Module (GSM)

TRANSMISSION CONTROL MODULE (TCM) TCM Neutral 'N' position Park 'P' position Position sensor/manual shaft Electrical connector The TCM is located on the top of the transmission casing and is connected on the high speed CAN (controller area network) bus to send and receive information to and

 Replacement sensor

Should the sensor require replacing, it should be carried out by a Dealer/Authorised Repairer. A replacement sensor must be fitted to a running wheel in order to be recognised by the system. The vehicle needs to be stationary for 15 minutes during the sensor fitment before the system is ready

© 2011-2025 Copyright www.rrevoque.org