Range Rover Evoque: Land rover tyre repair kit

Land rover tyre repair kit
Land rover tyre repair kit

1. Maximum speed label. 80 km/h (50 mph).
2. Tyre inflation hose.
3. Inflation hose protective cap.
4. Inflation hose connector.
5. Compressor power cable.
6. Power cable connector.
7. Sealant bottle receiver cap (orange).
8. Sealant bottle receiver.
9. Sealant bottle cap.
10. Sealant bottle.
11. Tyre pressure gauge.
12. Compressor on/off switch (I = on, 0 = off).

READ NEXT:

 Using the repair kit

Avoid skin contact with the sealant which contains natural rubber latex. Do not unscrew the sealant bottle from the receiver until it is empty, as sealant will leak out. If the tyre inflation

 Repair procedure

Check the tyre sidewall prior to inflation. If there are any cracks, bumps or similar damage, do not attempt to inflate the tyre. Do not stand directly beside the tyre while the compressor is

 Checking the tyre pressure after a repair

When driving the vehicle, if you experience vibrations, abnormal steering, or noises, reduce speed immediately. Drive with extreme caution and reduced speed to the first safe place to stop the

SEE MORE:

 Lifting

Two-Post Lift WARNING: Make sure that the vehicle is stable before commencing work. CAUTION: If the drive shaft(s) are to be removed, release the parking brake and select NEUTRAL 'N' in the transmission in order that the shaft(s) can be rotated when the vehicle is raised to the desired height.

 Front Airbag Deployment - Driver and Passenger

CAUTION: If the front airbags are deployed, the following components must be replaced: Driver airbag module Steering wheel Passenger airbag module Instrument panel Fly leads (where applicable) connecting front airbag modules to SRS harness All seat belt buckle pre-tensioner All occupied

© 2011-2025 Copyright www.rrevoque.org