Range Rover Evoque: Mirror dip when reversing
If the vehicle is equipped with memory seats, when reverse gear is selected the door mirrors can be set to automatically adjust, providing an improved viewing angle of the curb side for reversing. The Reverse-dip mirror feature must be switched on. See 56, VEHICLE INFORMATION AND SETTINGS MENU.
The exact dipped position can be adjusted while the mirrors are dipped; 1. With the ignition on, select reverse gear.
2. With the mirror adjust controls, adjust to the desired dip position.
3. Select neutral (N) gear. This will store your setting for future use.
The next time reverse is selected, the newly adjusted position will be selected.
When the gear selector is moved out of reverse, the mirrors will return to their previous position.
Note: If vehicle speed exceeds 7km/h (4mph) in reverse, the mirrors will return to their normal driving position for enhanced visibility.
READ NEXT:
Interior mirror
Auto dimming mirror
1. Ambient light sensor.
2. High beam assist sensor.
Interior mirror dimming will adjust
automatically according to the amount of
ambient light when the ignition is on. If r
Blind spot monitor
The Blind
Spot Monitor (BSM) system
is a supplement to, not a replacement
for, a safe driving style and use of the
exterior and rear-view mirrors.
Please note that BSM may not be able
to give
SEE MORE:
Checking the tyre pressure after a repair
When driving the vehicle, if
you
experience vibrations, abnormal
steering, or noises, reduce speed
immediately. Drive with extreme
caution and reduced speed to the first
safe place to stop the vehicle. Visually
examine the tyre, and check its
pressure. If there are any signs of
damage or
Transmission Fluid Drain and Refill
Draining
WARNING: Observe due care when draining, as the fluid can be very hot.
NOTE: Some variation in the illustrations may occur, but the essential
information is always correct.
1. Make sure that the automatic transmission is in the PARK position
and the handbrake is fully applied.
2. Refer to
