Range Rover Evoque: Removing the temporary spare wheel

to Remove the spare wheel prior to jacking the vehicle, to avoid destabilising the vehicle when raised.

loosen the Do not use power tools to loosen the spare wheel. Doing so may damage the mechanism.

1. To access the temporary spare wheel, fold forward the rear edge of the cover then remove it.

2. Turn the temporary spare wheel locking ring counter clockwise to gain access to the retaining bolt.

3. Turn the retaining bolt counter clockwise until it comes free.

4. Remove the temporary spare wheel.

READ NEXT:

 Temporary spare wheel

Always adhere to the instructions given on the temporary use spare wheel warning label. Failure to comply can be dangerous. When a temporary use spare wheel is fitted, drive with caution and r

 Using wheel chocks

Note: Wheel chocks are not supplied as part of the tool kit. Wheel chocks are a useful addition to a vehicle tool kit. Note the following advice when using wheel chocks. Before raising the vehic

 Wheel changing safety

Before raising the vehicle or changing a wheel, ensure that you read and comply with the following warnings. Always find a safe place to stop, off the highway and away from traffic. Ensure tha

SEE MORE:

 Tyre care

Do not drive the vehicle if a tyre is damaged, excessively worn, or incorrectly inflated. Avoid contaminating the tyres with vehicle fluids as they may cause damage to the tyre. Avoid spinning the wheels. The forces released can damage the structure of the tyre and cause it to fail. If w

 Battery - Diagnosis and Testing

Principles of Operation For a detailed description of the battery system and operation, refer to the relevant Description and Operation section of the workshop manual. REFER to: (414-01 Battery, Mounting and Cables) Inspection and Verification CAUTION: Diagnosis by substitution from a donor vehicle

© 2011-2025 Copyright www.rrevoque.org