Range Rover Evoque: Urban cycle
The urban test cycle is carried out from a cold start and consists of a series of accelerations, decelerations and periods of steady speed driving and engine idling. The maximum speed attained during the test is 50km/h (30mph) with an average speed of 19km/h (12mph).
READ NEXT:
Extra-urban cycle
The extra-urban test cycle is carried out immediately after the urban test.
Approximately half of the
test comprises steady speed driving, while the remainder consists of a series of
acceleration
Combined
The combined figure is an average of the urban and extra-urban test cycle
results, which has been
weighted to take account of the different distances covered during the two
tests.
For additional
SEE MORE:
Front Door Trim Panel
Removal
NOTE: Removal steps in this procedure may contain installation details.
All vehicles
1. Torque: 6 Nm
2. Torque: 6 Nm
3. Torque: 0.9 Nm
4. Torque: 1.3 Nm
5-door
5.
3-door
6.
All vehicles
7.
8.
9. NOTE: Do not disassemble further if the
component is removed for access only.
10.
11.
Starting System - GTDi 2.0L Petrol
Starting System - Component
Location
COMPONENT LOCATION
Solenoid
12V supply from battery
Solenoid power supply from Battery Junction Box (BJB)
Starter motor
Pinion gear
Starting System - Overview
OVERVIEW
The starter motor is rated as 1.3 kW and is a Denso conventional design with
the motor
© 2011-2025 Copyright www.rrevoque.org
