Range Rover Evoque: Booster cushions

In a situation where a child is too large to fit into a child safety seat but is still too small to safely use just the three point belt, a booster seat is recommended for maximum safety.

Follow the manufacturer's instructions for fitting and use, then adjust the seat belt to suit.

READ NEXT:

 Installing an isofix child seat

Installing an isofix child seat To install an ISOFIX child seat: 1. Locate the ISOFIX locking mechanism. 2. Slide the child seat into the locking mechanism. 3. If an upper tether is fitted to t

 Tether anchorage points (Australia only)

WARNING: Child restraint anchorages are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances are they to be used for adult seat belts, ha

 Attaching tether straps

1. Install the child restraint securely in one of the rear seating positions. 2. Pass the tether strap over the seat back and beneath the head restraint. 3. Attach the tether strap hook to the tet

SEE MORE:

 B-Pillar Lower Trim Panel, D-Pillar Trim Panel

B-Pillar Lower Trim Panel Removal NOTE: Removal steps in this procedure may contain installation details. 1. 2. 3. 4. CAUTION: Discard the bolt. Torque: 45 Nm 5. 6. Installation 1. WARNING: Make sure that a new bolt is installed. CAUTION: Make sure the safety belt is secure and correctly inst

 Transfer Case Seal LH TD4 2.2L Diesel

Special Tool(s) 100-012 Slide Hammer 205-873/1 Remover/Installer, Transfer Case Seal 205-873/2 Protector, Transfer Case Seal 205-873/3 Punch/Screws, Transfer Case Seal Removal NOTES: Removal steps in this procedure may contain installation details. Some variation in the illustrations may occur, but

© 2011-2025 Copyright www.rrevoque.org