Range Rover Evoque: Deselecting valet mode

If Valet mode is active when you enter the vehicle, touch the Valet button to view the Valet mode screen.

Enter your four digit PIN and touch the OK button.

Valet mode is deactivated is displayed.

- The tailgate will return to the previously set security requirement.

- All touch screen functions are enabled.

See 14, SELECTING VALET MODE.

Note: If the PIN number is lost or forgotten, Valet mode can be deactivated only by your Dealer/Authorised Repairer.

READ NEXT:

 Operating the tailgate

Ensure there is minimum space of 1.0M (39 in) above the rear of vehicle before operating the tailgate. Insufficient space may result in damage to the vehicle. Do not operate the tailgate if

 Powered tailgate operation

1. Press to open the powered tailgate. 2. Press and release to close the powered tailgate. After the tailgate has opened to its set height, it can be manually raised or lowered. If the tailgate

 Powered tailgate opening height

The maximum opening height can be set as required. This is useful in parking areas with low ceiling heights or just for ease of use. 1. Open the tailgate to the position which you want to set as t

SEE MORE:

 Wiring Harness - Description and Operation

Introduction CAUTION: Do not use any other heat shrink sleeve other than the approved glue lined heat shrink sleeve mentioned in the repair procedure. The purpose of this document is to promote quick and efficient minor repair to harness connectors or cables using approved methods and the wiring

 Selecting valet mode

Valet mode allows the vehicle to be driven, e.g., by a parking attendant, but leaves the tailgate locked and restricts use of the touch screen. This prevents access to telephone numbers, navigation addresses and audio system settings. From the Home menu, select Valet: Enter a four digit Perso

© 2011-2025 Copyright www.rrevoque.org