Range Rover Evoque: Manual seats

Manual seats
Manual seats

the seat while the Do not adjust the seat while the vehicle is moving. Doing so could cause loss of vehicle control and personal injury.

1. Forward and back adjustment.

2. Height adjustment.

3. Backrest adjustment.

4. Head restraint adjustment.

READ NEXT:

 Electric seats

Electric seats 1. Lumbar support adjustment. 2. Backrest adjustment. 3. Head restraint adjustment. 4. Height adjustment. 5. Forward and back adjustment. 6. Cushion angle adjustment. To adjust

 Stalled adjustment

If seat movement stops unexpectedly during adjustment check for any obstructions and remove. Once any obstructions have been removed the seat adjustment mechanism can be reset as follows. Ope

 Sitting in the correct position

The driver and front seat passenger must not ride with the seat fully reclined. Do not adjust the seat while the vehicle is moving. The seat, head restraint, seat belt and airbags, all con

SEE MORE:

 Central Junction Box (CJB)

Removal CAUTIONS: If a new component is to be installed, the Land Rover approved diagnostic equipment must be connected prior to removal, the data must then be downloaded from it and the keys (remote control handsets) set into default mode. Failure to follow this instruction will result in permane

 Rear Wheelhouse Outer

Removal NOTES: It is necessary to remove the inner quarter panel to enable removal and installation of the rear wheelhouse outer. The rear wheelhouse outer is manufactured from mild steel. This method describes the LH rear wheelhouse outer, the RH side is similar. 1. The rear wheelhouse outer is

© 2011-2025 Copyright www.rrevoque.org