Range Rover Evoque: Wheel Knuckle Rear Bushing

Special Tool(s)

204-620-01
Installer, Wheel Knuckle Bushing

204-620-02
Remover/Installer, Wheel Knuckle Bushing

204-620-03
Remover, Wheel Knuckle Bushing

LR-121
Hydraulic Cylinder 10t

Removal

1. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle.

2. Remove the wheel and tire.

Refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation).

3.

Range Rover Evoque. Rear Suspension

4.

Range Rover Evoque. Rear Suspension

5. CAUTION: Note the position of the component and mark the surrounding area to aid installation.

Range Rover Evoque. Rear Suspension

6. Remove the bushing.

Special Tool(s): LR-121, 204-620-02, 204-620-03

Range Rover Evoque. Rear Suspension

Installation

1. CAUTION: Make sure that the component is installed to the position noted on removal.

Range Rover Evoque. Rear Suspension

2. CAUTION: Make sure the correct special tool is used to install the bushings to the correct depth.

Install the bushing.

Special Tool(s): LR-121, 204-620-01, 204-620-02

Range Rover Evoque. Rear Suspension

3. Torque: 270 Nm

Range Rover Evoque. Rear Suspension

4. Torque: 110 Nm

Range Rover Evoque. Rear Suspension

5. Install the wheel and tire.

Refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation).

READ NEXT:

 Rear Shock Absorber Vehicles With: Dynamic Suspension

General Equipment Suspension Spring Compressor Vise Removal WARNINGS: Make sure the spring compressor Safe Working Load (SWL) meets or exceeds the spring rating quoted in the Specifcations sectio

 Shock Absorber and Spring Assembly Vehicles With: Dynamic Suspension

Special Tool(s) JLR-204-804 Lever, Wheel Knuckle General Equipment Transmission jack Wooden Block Removal CAUTIONS: Nuts and bolts must be tightened with the weight of the vehicle on the suspensi

 Spring Vehicles Without: Dynamic Suspension

Removal WARNINGS: Make sure the spring compressor Safe Working Load (SWL) meets or exceeds the spring rating quoted in the Specifcations section. Always follow the spring compressor manufacturer's i

SEE MORE:

 Luggage anchor points

Luggage anchor points All items carried in the luggage area should be properly secured. 1. Bag hooks. - The bag hooks should only be used to secure light items such as shopping bags. 2. Load securing lashing eyes. - To assist in safely securing large items of luggage, four lashing eyes

 Drive Pinion Flange Vehicles With: AWF21 6-Speed Automatic Transmission

Special Tool(s) 205-053 Retainer, Drive Flange Removal All vehicles 1. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle. Vehicles with diesel engine 2. Refer to: Exhaust System (309-00B Exhaust System - TD4 2.2L Diesel, Removal and Installation). Vehicles wit

© 2011-2025 Copyright www.rrevoque.org