Range Rover Evoque: Control Components - Component Location
Component Location
COMPONENT LOCATION (GTDI)
- Refrigerant pressure sensor
- Cabin humidity sensor (if fitted)
- A/C (air conditioning) compressor
- ECT (engine coolant temperature) sensor
- Ambient air temperature sensor
- Air intake stepper motor
- Pollution sensor
- Windshield distribution (defrost) stepper motor
- RH (right-hand) temperature blend stepper motor
- Sunload sensor
- Cabin temperature sensor
- ATC (automatic temperature control) module
- Evaporator temperature sensor
- LH (left-hand) temperature blend stepper motor
- Blower motor control module
- Face/feet distribution stepper motor
- Blower motor
COMPONENT LOCATION (DW12)
- Refrigerant pressure sensor
- Cabin humidity sensor (if fitted)
- A/C compressor
- ECT sensor
- Ambient air temperature sensor
Control Components AWD - Overview
OVERVIEW
The climate control system incorporates the heating, ventilation and A/C (air conditioning) systems. There are 2 main types of climate control system available:
- a dual zone automatic system
- a dual zone automatic system with cool rear face option.
The climate control functions for both systems are controlled by the ATC (automatic temperature control) module. The ATC module is mounted in the center console and contains both the system electronic software and user controls.
The ATC module works in conjunction with a number of other vehicle control modules, including the ECM (engine control module), which controls a number of climate control sub-systems on receipt of requests from the ATC module.
The dual zone climate control system features automatic control of air temperature, air distribution and blower motor speed. The ATC module is also able to control individual temperature requests for both the driver and passenger side of the cabin.
NOTE: The ATC module can only maintain a maximum temperature difference
between the 2 sides of the cabin of up
to approximately 3READ NEXT:
Control Diagram
NOTE: A = Hardwired; D = High Speed CAN (controller area network) bus; N =
Medium Speed CAN bus; O = LIN
(local interconnect network) bus
DW12C is shown, GTDi is similar
Battery
B
Control Diagram, System Operation
ATC MODULE
NOTE: The 'ECON' button has been renamed 'A/C' to prevent confusion with
the Stop/Start system 'Eco' switch.
The ATC module is mounted in the center console and is integral with the
cont
Component Description
SEE MORE:
Never exceed
the maximum weights
for either the vehicle, or the trailer.
Doing so can cause accelerated wear
and damage to the vehicle. It can also
adversely affect vehicle stability and
braking which in turn can lead to loss
of control and increased braking
distance, resulting in a rollov
Towing a trailer
Fuse box locations
When a fuse box lid is
removed, take
care to protect the box from moisture,
and refit the lid at the earliest
opportunity.
Engine compartment - fuse box access:
1. Remove the two plastic fixings.
2. Pull the tube up to release from the air box.
3. Delatch the tabs. Th
Fuse box locations
