Range Rover Evoque: Park

Use when the vehicle is parked. The transmission will be locked.

should be Park (P) or Neutral (N) should be engaged and the parking brake applied when the vehicle is stationary.
Always select P and switch off the ignition before leaving the vehicle.

the vehicle Never select Park (P) when the vehicle is in motion.

READ NEXT:

 Reverse gear

Never select Reverse (R) when the vehicle is in forward motion. Before selecting reverse gear, ensure the vehicle is stationary and the brakes are applied. Rotate to R.

 Neutral

Disconnects drive to the wheels. Use the parking brake while N is selected. Do not use for vehicle recovery purposes.

 Drive

Never select a forward gear when the vehicle is in rearward motion. Gear changing is fully automatic. Shift points are determined by accelerator pedal position and current road speed.

SEE MORE:

 Balance Shaft Assembly

Special Tool(s) JLR-303-1595 Alignment Tool, Crankshaft Damper Removal NOTES: Some illustrations may show the engine removed for clarity. Some variation in the illustrations may occur, but the essential information is always correct. Removal steps in this procedure may contain installation detail

 Condenser TD4 2.2L Diesel

Removal CAUTION: Make sure that all openings are sealed. Use new blanking caps. NOTES: Removal steps in this procedure may contain installation details. Some variation in the illustrations may occur, but the essential information is always correct. 1. Disconnect the battery ground cable. Refer t

© 2011-2025 Copyright www.rrevoque.org