Range Rover Evoque: Stop/start (manual transmission only)
Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Starting the engine / Stop/start (manual transmission only)
The Stop/Start system has been designed to improve fuel efficiency. The system is automatically activated when the ignition is switched on.
When the engine has been stopped by the stop/start system, the ECO icon will illuminate.
When the vehicle comes to a stop, neutral is selected and the clutch is fully released, the engine automatically switches off.
When the clutch is depressed prior to selecting a gear, the engine automatically restarts.
READ NEXT:
Conditions preventing automatic engine stop
The engine will not automatically stop if:<>
- the external temperature is below approximately 0°C (32°F)
- the external temperature is above approximately40°C (104°F)
- engine has not re
Conditions causing automatic engine restart
The engine will automatically start if:<>
- climate control system demand increases
- the vehicle’s speed reaches approximately 4km/h (2.5mph)
- HDC or a Terrain Response special program ar
Disabling stop/start
Disabling stop/start
To switch the system off (preventing automatic
stop/start) press the ECO switch. The LED
indicator will extinguish to confirm that the
system is off.
Note: The engine will
SEE MORE:
Manual Transmission AWD
Component
Location
COMPONENT LOCATION
Manual transmission
Selector lever assembly
Overview
OVERVIEW
The M66EH50 manual transmission is a 6 speed unit manufactured by Getrag-Ford
in Cologne, Germany. The transmission
is a highly compact 4 shaft design, incorporating the front final drive gear,
Hydraulic Brake Actuation
Hydraulic Brake Actuation LHD AWD/RHD AWD - Component Location
NOTE: RHD (right-hand drive) installation shown, LHD (left-hand drive)
installation similar.
COMPONENT LOCATION
Brake pedal
Hydraulic pipes
Integrated HCU (hydraulic control unit) and ABS (anti-lock brake system)
module
Brake ma
© 2011-2025 Copyright www.rrevoque.org
