Range Rover Evoque: Exterior mirrors
Exterior mirrors
1. Mirror selector switches. Press to select the left or right mirror.
2. Mirror adjustment switch. Move up/down/left or right to adjust the mirror glass.
3. Press both selector switches together to fold/unfold the mirrors (power fold option).
The mirrors can be adjusted and folded when the ignition is on and for up to 5 minutes after the ignition is switched off, provided the driver’s door is not opened.
Note: Powerfold will operate only if vehicle speed is below 113km/h (70 mph).
Note: The rear view door mirror heaters operate automatically according to the external temperature and windscreen wiper operation.
Note: An amount of knock protection is designed into the door mirrors. If a mirror is accidentally knocked inwards or manually folded inwards, the mirror head will be disengaged from the folding mechanism. To re-engage the mechanism, fold then unfold the mirror using the switch.
Note: A thermal cut-out which will temporarily disable the powerfold feature if the switches are operated repeatedly.
READ NEXT:
Automatic powerfold mirrors
Powerfold mirrors can be configured to
automatically fold when the vehicle is locked
and unfold when unlocked.
This function can be enabled/disabled
by your Dealer/Authorised Repairer.
Note: If
Mirror dip when reversing
If the vehicle is equipped with memory seats,
when reverse gear is selected the door mirrors
can be set to automatically adjust, providing an
improved viewing angle of the curb side for
reversing.
Interior mirror
Auto dimming mirror
1. Ambient light sensor.
2. High beam assist sensor.
Interior mirror dimming will adjust
automatically according to the amount of
ambient light when the ignition is on. If r
SEE MORE:
Headlamps
Principle of Operation
Three types of headlamp are available: Halogen, bi-xenon or Adaptive Front
Lighting System (AFS).
For a detailed description of the headlamps operation, refer to the relevant
Description and Operation section of the
workshop manual. REFER to: (417-01 Exterior Lighting)
Give
Front Seat Recliner Motor
Removal
NOTE: Removal steps in this procedure may contain installation details.
All vehicles
1. Refer to: Specifications (414-01 Battery, Mounting and Cables,
Specifications).
2. Refer to: Standard Workshop Practices (100-00 General Information,
Description and Operation).
3. Refer to: Front Seat Co
