Range Rover Evoque: Headliner

Removal

NOTES:

Removal steps in this procedure may contain installation details.

Vehicles with glass roof panel shown, vehicles without glass roof panel similar.

All vehicles

1. Refer to: Windshield Glass (501-11 Glass, Frames and Mechanisms, Removal and Installation).

3-door

2. NOTE: The procedure must be carried out on both sides.

Refer to: B-Pillar Upper Trim Panel - 3-Door (501-05 Interior Trim and Ornamentation, Removal and Installation).

5-door

3. NOTE: The procedure must be carried out on both sides.

Refer to: B-Pillar Upper Trim Panel - 5-Door (501-05 Interior Trim and Ornamentation, Removal and Installation).

4. NOTE: The procedure must be carried out on both sides.

Refer to: C-Pillar Upper Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).

All vehicles

5. NOTE: The procedure must be carried out on both sides.

Refer to: D-Pillar Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).

6. Refer to: Overhead Console (501-12 Instrument Panel and Console, Removal and Installation).

7. NOTE: The step must be carried out on both sides.

8. NOTE: The step must be carried out on both sides.

9. NOTE: The step must be carried out on both sides.

10. NOTE: The step must be carried out on both sides.

11.

12.

13. NOTE: The procedure must be carried out on both sides.

14. NOTE: The step must be carried out on both sides.

15. NOTE: The step must be carried out on both sides.

16.

17. CAUTION: Do not use excessive force to release the headliner from the side retaining brackets.

NOTES:

Headliner shown removed for clarity.

Vehicles with glass roof panel only.

• Release the headliner from the retaining brackets using a suitable plastic trim tool.

18. CAUTION: Extra care must be taken at this point, as the headliner is still retained by a locating clip at the rear and the 3 retaining clips at the front.

NOTE: This step requires the aid of another technician.

Release the headliner retaining clips.

19. NOTES:

Headliner shown removed for clarity.

This step requires the aid of another technician.

• Release the headliner from the 3 front retaining clips (1) and slide rear wards to detatch from the locating clip (2).
• Lower the headliner for access.

20.

21. NOTE: This step requires the aid of another technician.

22. NOTES:

Do not disassemble further if the component is removed for access only.

When installing the component, install the left-hand side first.

Installation

1. To install, reverse the removal procedure.

READ NEXT: