Range Rover Evoque: Fuel Tank and Lines - Component
Location
Component
Location
COMPONENT LOCATION - ROW

- Connection to purge valve
- Fuel Low Pressure (LP) sensor
- Fuel fired booster heater - fuel supply pipe connection (if fitted)
- LP fuel supply pipe
- Fuel fired booster heater - fuel supply pipe (if fitted)
- Fuel pump delivery module
- Fuel tank breather pipe
- Fuel filler cap
- Fuel tank filler pipe
- Fuel tank inlet hose and check valve
- Fuel tank
- Charcoal canister (reference only)
- Fuel Pump Driver Module (FPDM)
- Fuel tank vent breather pipe to charcoal canister
- Fuel vapor pipe from charcoal canister to purge valve
- Fuel vapor pipe to purge valve
- LP fuel supply connection to High Pressure (HP) pump
COMPONENT LOCATION - NAS

- Connection to purge valve
- Fuel Low Pressure (LP) sensor
- LP fuel supply pipe
- Fuel pump delivery module
- Fuel tank breather pipe
- Fuel filler cap
- Fuel tank filler pipe
- Fuel tank inlet hose and check valve
- Fuel tank
- DMTL pump
- Charcoal canister (reference only)
- Fuel Pump Driver Module (FPDM)
- Fuel tank vent breather pipe to charcoal canister
- Fuel vapor pipe from charcoal canister to purge valve
- Fuel vapor pipe to purge valve
- LP fuel supply connection to High Pressure (HP) pump
Overview
OVERVIEW
The fuel system is divided into 2 sub systems:
- Low pressure system
- High pressure system.
The low pressure system features the following components:
- Fuel tank
- Fuel pump delivery module in tank
The low pressure system pressure is 4.5 bar (65.3 lbf/in
READ NEXT:
Control Diagram
NOTE: A = Hardwired
Battery
Battery Junction Box (BJB)
Fuel Pump Driver Module (FPDM)
Fuel pump delivery module
Engine Control Module (ECM)
Central Junction Box (CJB)
System O
Special Tool(s)
310-123
Locking Ring, Fuel Tank
Removal
WARNINGS:
Wait for a minimum of 1 minute after the engine has stopped before
carrying out any repair to the fuel injection
system.
Avoid flame
Special Tool(s)
310-123
Locking Ring, Fuel Tank
Removal
WARNINGS:
Fuel may still be present in the fuel tank after draining.
Avoid flames, sparks or lighted substances.
CAUTIONS:
Extreme cleanliness
SEE MORE:
Manufactured under license from Dolby
Laboratories.
Dolby, Pro Logic, and the double-D symbol are
registered trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent
#’s: 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,487,535; 7,003,467 & other U.S.
and worldw
Special Tool(s)
205-857
Remover, Halfshaft
Removal
CAUTION: LH illustration shown, RH is similar.
NOTE: Some variation in the illustrations may occur, but the essential
information is always correct.
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2. Re
© 2011-2025 Copyright www.rrevoque.org
