Range Rover Evoque: Land rover tyre repair kit

Land rover tyre repair kit
Land rover tyre repair kit

1. Maximum speed label. 80 km/h (50 mph).
2. Tyre inflation hose.
3. Inflation hose protective cap.
4. Inflation hose connector.
5. Compressor power cable.
6. Power cable connector.
7. Sealant bottle receiver cap (orange).
8. Sealant bottle receiver.
9. Sealant bottle cap.
10. Sealant bottle.
11. Tyre pressure gauge.
12. Compressor on/off switch (I = on, 0 = off).

READ NEXT:

 Using the repair kit

Avoid skin contact with the sealant which contains natural rubber latex. Do not unscrew the sealant bottle from the receiver until it is empty, as sealant will leak out. If the tyre inflation

 Repair procedure

Check the tyre sidewall prior to inflation. If there are any cracks, bumps or similar damage, do not attempt to inflate the tyre. Do not stand directly beside the tyre while the compressor is

 Checking the tyre pressure after a repair

When driving the vehicle, if you experience vibrations, abnormal steering, or noises, reduce speed immediately. Drive with extreme caution and reduced speed to the first safe place to stop the

SEE MORE:

 Air Bag Supplemental Restraint System (SRS)

Component Location COMPONENT LOCATION SHEET 1 OF 2 Battery ECM (engine control module) CJB (central junction box) Passenger air bag Overhead console RCM (restraints control module) Driver air bag Driver lower air bag Clockspring Adaptive steering column BJB (battery junction box) COMPO

 Engine Control Module (PCM)

Engine Control Module 2.2L - I4 - DW12c TD4  CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault, and may also cause additional faults in the vehicle being tested and/or the donor vehicle.  

© 2011-2025 Copyright www.rrevoque.org